You Will need:
- 3 colours of 10mm round crystal
- 2 bags of Metalised Acrylic Hanger Bead CCB-2669-S
- Wire Protectors
- 30cm Length of Tiger Tail
Wire Protector is a horse shoe shaped finding which is hollow.
Onto your wire string 2 crimp beads, followed by your wire protector. Cut your chain in half and insert one end of your chain over the tiger tail and into the centre of your protector before taking the wire back through the 2 crimp beads.
Pinch the ends of your wire protector together, and push the crimps up from the back so that they fit snugly against it. Flatten your crimps against the wire and make sure they are secure. Remember that all the weight of your design is held at his point.
Onto your wire, and ensuring that both tails are hidden, string 3 acrylic drops followed by a crystal to the desired length. The drops and crystals fall randomly.
Once you are happy string 2 more crimp beads onto your wire and repeat the above procedure with your wire protector to add the other piece of chain.
Onto the end of your chain add your fastenings using jump rings. Chain diameter permitting, use 2 for added security.